Floating Contact
Phone
Email

Text Message

+1 (916) 299-5335
Message

How to Switch Medical Billing Companies Without Interrupting Cash Flow

Switch medical billing companies hero banner: one cutover date, an owner for every open claim, the 4-Lane Handoff for claims, remits, deposits, and eligibility, parallel period, and 90-day tracking from ClaimMax RCM.

To switch medical billing companies without interrupting cash flow, sign with the new company before you give notice. Set one written cutover date and name an owner for every open claim. Update claims, electronic remittance advice (ERA), and eligibility links, keep electronic funds transfer (EFT) deposits in your name, and reconcile every week for 90 days.

Practices that lose money during a switch usually lose it in four predictable gaps. You can close each gap before go-live, whichever medical billing company you pick next. No plan can promise zero disruption, but a written plan removes the common causes.

Key TakeawaysPlan the handoff: A medical billing transition plan overlaps both companies, so no claim sits unowned on cutover day.Give every open claim one owner: Put the owner and the deadline in writing before the cutover date.Treat four connections as separate jobs: Claims, remits, deposits, and eligibility make up the ClaimMax 4-Lane Handoff, and changing one doesn’t change the others.Send each claim once: During the parallel period, both companies compare results, and a single company submits each claim.Measure against your own baseline: Track the same numbers every week for 90 days and judge the trend.

Why Cash Flow Drops When You Switch Medical Billing Companies

Cash flow drops when you switch medical billing companies for four planning reasons. Claims stop going out while access gets set up, nobody works the claims already filed, remittances keep landing at the old setup, and eligibility or enrollment links break. You can close all four gaps before go-live, and the new team’s speed has little to do with them.

The Four Places Money Gets Stuck During a Medical Billing Transition

  • Submission pause: Claims sit unbilled while the new team waits for system and clearinghouse access. Each day of pause pushes payment out by the length of the payer’s cycle.
  • Orphaned legacy AR: The outgoing company stops chasing claims it filed, and the incoming company hasn’t taken them over yet. Those claims age toward their filing and appeal deadlines.
  • Remits routed to the old setup: ERA files and paper checks keep arriving where nobody posts them. The payer pays, but no one applies the money to your claims.
  • Front desk breaks: Eligibility checks, prior authorizations, and payer enrollment details don’t carry over in full. Your team then spends the first weeks working denials the old company never saw.

In a July 2026 MGMA Stat poll taken July 28, 2026, 32% of medical group leaders said their days in AR were higher than a year earlier. MGMA also described one system transition that delayed billing for two months because of interface problems.

What a Short Submission Pause Costs

Take an illustrative practice that bills $8,000 a day in charges. If claims stop for 10 business days during setup, $80,000 hasn’t reached a single payer. Payers can’t pay a claim they haven’t received, and their processing clock only starts once the claim arrives.

Original Medicare adds its own wait. According to CGS Medicare payment floor guidance, Medicare holds a clean electronic claim through a waiting period of 13 days before the contractor can pay it. Commercial payers set their own timelines, and many take longer.

Pause length (illustrative)Charges not yet billed at $8,000 a dayWhen the gap shows up in deposits
5 business days$40,000About 2 to 4 weeks later
10 business days$80,000About 3 to 6 weeks later
15 business days$120,000About 4 to 8 weeks later

You’ll feel the damage weeks after the pause ends. A stall of two weeks in October shows up as thin deposits in November, after everyone thinks the switch is finished. That lag hurts medical practice cash flow because rent and payroll still come due on schedule.

In the first month after a switch, most of your deposits still come from claims the old company filed. Protecting those claims comes first. If a pause like this worries you, our medical billing services use a parallel transition, so your next claim cycle keeps moving while access gets set up.

[Editor note: embed the ClaimMax switching video here, with chapters that match the H2s and a transcript link.]

Before You Give Notice, Make Sure the Billing Company Is the Problem

Switch when the shortfall traces back to how your vendor works: the same denial reasons every month, aged claims nobody touches, or reports you can’t match to bank deposits. If the problem starts at your front desk, it will follow you to any new company you hire.

Before you switch medical billing companies, sort the warning signs into two piles. These signs point to your current medical billing company:

  • The same denial reasons show up month after month.
  • Aged AR keeps growing, and nobody can say which claims get worked next.
  • Reports don’t tie back to your bank deposits.
  • Fees changed without your approval.
  • No one who knows your account answers questions within a day or two.

Some causes travel with you. Registration errors, skipped eligibility checks, and unsigned visit notes sit on the practice’s side of each revenue cycle step. Medical billing outsourcing won’t fix those, and switching medical billing companies won’t either until your front desk process changes.

Denials alone don’t prove the vendor is at fault. In a January 2026 MGMA Stat poll, practice leaders named denials and appeals as their biggest revenue cycle leak at 48%, followed by front end issues at 23%. Some of those denials start with intake errors inside the practice.

Pull a Baseline From the Past 12 Months

Run a small revenue cycle audit of your own before you call anyone. Pull these numbers for the past 12 months, and you’ll have a fair standard to hold the next company to.

MetricWhy it matters during a switch
Days in AR, overall and by payerShows whether cash speeds up or slows down after cutover
Percent of AR over 90 daysShows whether anyone is working older claims down
Denial rate and top five reasonsSeparates inherited denials from new ones
Clean claim rateTests the new company’s claim edits from the first batch
Charge lag (date of service to submission)Catches a submission pause in its first week
Net collections vs. bank depositsConfirms that reported money reached your account
Unbilled chargesShows the pipeline at risk on cutover day

Agree on what counts as a clean claim before you compare anything, since vendors don’t all define it the same way. An outside medical billing audit before notice works too, as long as it uses the same definitions you’ll use later.

Not Sure Your Billing Company Is the Problem?Share your aging report and 12 months of denial data with us. Our free analysis compares them against the baseline above and flags up to three gaps in your current billing before any contract, with zero obligation.Get Your Free Revenue Analysis →

Step 1: Read Your Medical Billing Company Contract and Secure Your Data

Before you give notice, find six things in your current agreement: the notice period, termination fees, run-out terms for claims already filed, the data return format and deadline, who controls logins, and where payments land. Sign with the new company first, so billing keeps moving while you wait out the notice period.

Contract Clauses That Set Your Exit Date and Costs

Read these clauses before you switch medical billing companies. They set your earliest exit date, your exit costs, and what you can still demand from the old company.

ClauseWhat to look forCash flow risk if you miss it
Notice periodNumber of days and how notice must be deliveredYour exit date slips past the planned cutover
Early termination feeA flat fee or a percentageAn unbudgeted cost in the month you switch
Run-out (tail) termsWho works older claims, for how long, and at what feeOrphaned AR, or two companies charging on the same payment
Data returnFormat (CSV or Excel, not only PDF), deadline, and any feeYour new team can’t sort claims by deadline
System and portal accessLogins in your practice’s name, and the date access endsA lockout on exit day
Payment depositsPayer money landing in your own accountDeposits you can’t see or reconcile
BAA termination termsReturn or destruction of patient dataCompliance exposure after you leave

Your medical billing company contract also sets the order of operations. Send written notice only after the new company confirms its system and clearinghouse access works. Before you terminate a medical billing contract, confirm who keeps working claims during the notice period and how that work gets paid.

Your Billing Data Belongs to Your Practice

If you outsource medical billing, the vendor holds your data on your behalf as a HIPAA business associate, and ownership stays with your practice. HHS guidance on blocked access says a business associate generally can’t block a covered entity’s access to the protected health information (PHI) it maintains, including to settle a payment dispute.

The same HHS guidance says the business associate must return PHI as your business associate agreement (BAA) requires once either side ends the agreement. In its HHS sample BAA provisions note that an agreement could require the vendor to transmit the data to another business associate at termination, so you can write a direct handoff to your new company into the contract.

Three moves protect you here:

  • Request data exports before you give notice.
  • Sign the new company’s BAA before any PHI moves.
  • Get written confirmation of what the old company returned or destroyed.

This is general information, not legal advice. Have counsel review the contract and the BAA before you send notice.

Step 2: Set One Cutover Date and Give Every Claim an Owner

Pick one cutover rule, usually the date of service, and put it in writing. The outgoing company bills services before that date, and the new company bills everything after it. Then assign every open claim, denial, appeal, and credit balance to a named owner with a deadline.

That written rule keeps you from paying twice or losing a claim in the gap when you switch medical billing companies, and both teams know whose claim is whose.

Date of Service or Submission Date?

A date of service cutover is the simplest choice, since each claim has one sender. Start it on the first day of a month, and your reports split by company without manual cleanup.

Changing medical billing companies under a submission date rule makes sense if your Medicare Administrative Contractor (MAC) can’t keep two billing agents on file at once. Under that rule, everything sent after the effective date goes through the new company, including older charges nobody billed yet. Step 3 covers how to ask your MAC.

Avoid squeezing the move into 30 days to beat a renewal date. Teams that rush leave claims half done, and those claims reach their deadlines first.

Four Ways to Handle Legacy AR

OptionWorks best ifWatch out for
Outgoing company runs it outThe contract requires run-out work and the notice period is longIt depends on their cooperation, so keep read access open
New company takes all open ARYou want one owner and one set of reportsIt needs full claim history and notes, plus a stated rate for that work
Split by claim typeThe old company finishes recent clean claims and the new company works denials and aged claimsYou manage two vendors at once
Practice staff finish itThe aged balance is smallStaff time, portal access, and appeal experience

Accounts receivable in medical billing stays the practice’s money, whoever works it. If both contracts pay a percentage of collections, assign each claim’s fee to one company in writing. Otherwise a payment that posts in month two can show up on both invoices.

If your old company won’t commit to a run-out window, our legacy AR recovery team can take the open claim list and work it by deadline from the first day.

Build an Ownership Ledger for Every Open Claim

Save a snapshot of every open claim on cutover day. That list never changes, and it becomes the checklist you close at the end of the run-out. A medical billing transition stays on track when anyone on either team can open the ledger and see who owns a claim.

Give the ledger these columns:

  • Claim number and patient ID
  • Date of service and payer
  • Current balance
  • Status and last action
  • Next action
  • Filing or appeal deadline
  • Owner
Work itemOwnerProof of handoff
New charges after cutoverIncoming companyAccepted claim and payer acknowledgment
Unpaid claims from before cutoverAs the contract statesLedger row with an owner and a deadline
Denials and appealsNamed for each claimAppeal packet and proof of filing
ERA postingNamed for each payer and date rangeRemittance matched to the ledger
Patient balances and refundsNamedStatement and refund log
Audit and record requestsNamedRequest, deadline, and response

Step 3: Update Medicare and Payer Connections Before Go-Live

Claims, remittances, deposits, and eligibility run on separate connections, and updating one doesn’t update the others. Before the cutover date, change each connection one payer at a time: notify your MAC about the new billing agent, authorize ERA delivery, keep EFT in your practice’s name, and link the new vendor for Medicare eligibility checks.

We call this the ClaimMax 4-Lane Handoff, and it covers the part of a plan to switch medical billing companies that most checklists skip. Each lane has its own paperwork and its own failure point, so you track each lane on its own until the payer confirms it.

[Image: ClaimMax 4-Lane Handoff diagram. Alt text: “ClaimMax 4-Lane Handoff: claims, remits, deposits, eligibility”]

LaneWhat it controlsWhat changes in a switchWho signs or authorizes
1. Claims (EDI 837)Who sends your claimsNew billing agent or clearinghouse authorizationThe practice, in writing
2. Remits (ERA 835)Who receives payment detailERA routing to the team that posts paymentsThe practice
3. Deposits (EFT)Where the money landsUsually nothing, since the account stays yoursThe practice
4. Eligibility (270/271 and HETS)Who checks coverageThe new vendor’s ID linked to each NPIThe practice

Claims: Notify Your MAC Before the Billing Agent Changes

Medicare wants the notice before the change. Under the CMS EDI and ERA instructions, providers must notify their A/B MAC or Common Electronic Data Interchange (CEDI) contractor in writing before changing billing agents or clearinghouses. The same instructions bar you from sharing your own EDI number and password with an agent, which must get its own.

MACs differ in how many agents they can support for one provider. Ask yours in writing whether both companies can stay on file during the overlap, because the answer decides your cutover rule from Step 2. If the switch also means changing clearinghouse connections, start with our notes on comparing clearinghouses.

Remits: Make Sure the ERA Reaches the Team Posting Payments

A billing agent or clearinghouse can’t receive your Medicare remittance advice unless you authorize it in writing. If you already have a signed ERA enrollment form on file with your MAC, CMS says you don’t need a new one because you changed agents. The advance written notice still applies.

Commercial payers handle remittance setup one payer at a time, through their portals or your clearinghouse. Ask your MAC and each payer whether the old company can keep receiving remits during the run-out. If it can’t, decide in writing who posts those payments.

Deposits: Keep EFT in Your Practice’s Name

Your bank account usually stays the same when the billing company changes. The CMS-588 EFT form requires the account to carry the provider’s name or legal business name, and the provider certifies sole control of the account that receives EFT deposits. Your EFT enrollment ties each payer’s payments to that account.

Treat any request to change the deposit account during a switch as a red flag until you verify it through a contact you already know. A new EFT enrollment only comes up if your bank or TIN changes, and our team handles EFT and ERA enrollment with your approval on every form.

Eligibility: The 2026 HETS Rule Most Checklists Miss

Since May 11, 2026, the HIPAA Eligibility Transaction System (HETS) has required an active HETS EDI enrollment for each NPI that a vendor or clearinghouse submits for Medicare eligibility checks. Without that enrollment, HETS rejects the request, according to the CMS HETS enrollment rules.

You link vendors yourself. CMS lets providers link more than one vendor or clearinghouse ID, add IDs at any time, and record each relationship’s effective and termination dates. It also tells vendors not to enroll providers on their own. Link the new vendor’s ID before go-live, and enter a termination date for the old one.

A failed eligibility check won’t stop a claim by itself. It leaves your front desk guessing about coverage, and your staff end up working those guesses as denials by week three. If coverage checks are already a weak spot, our eligibility verification team can run them through the overlap.

Medicare Enrollment Record and Commercial Payers

Your Medicare enrollment lists your billing agency too. In CMS-855B Section 8, a group can add, change, or remove a billing agency with an effective date, and individual practitioners who bill on their own use the CMS-855I. The form states that you stay responsible for the accuracy of claims submitted on your behalf.

Timing matters. Under 42 CFR 424.516, physicians and practitioner organizations report ownership changes, adverse legal actions, and practice location changes within 30 days, and all other enrollment changes within 90 days. You can file through PECOS, Medicare’s online enrollment system, or on the paper form.

Switching medical billing companies doesn’t restart payer credentialing unless your TIN, group, or location also changes. Keep your CAQH profile and payer portal admin rights under practice control, and track each payer in one place:

PayerClaims routeERA sent toEFT account (yours)Portal admin (practice name)Paper check addressDate confirmed
Medicare (MAC)
Medicaid
Medicare Advantage plan
Commercial payer

If filling in this tracker for every payer sounds like a project, our credentialing team handles enrollment changes during onboarding and confirms each lane before cutover.

Step 4: Hand Off Your Data and Work Old Claims by Deadline

Move claim files in CSV or Excel through an encrypted channel once the new BAA is signed. Then sort every open claim by the date its filing or appeal deadline expires. A newer claim with a short payer limit can expire before an older one, so claim age alone gives you the wrong working order.

What to Request From the Outgoing Company

Ask for these in writing, with a delivery date before your notice period ends. Accounts receivable in medical billing only moves without gaps when each open claim travels with its history.

  • A full export of claim, payment, and adjustment history in CSV or Excel
  • Open AR by payer, with the last action and next action on each claim
  • Unbilled and held charges, with the reason each one was held
  • Open denials and appeals, with each deadline and proof of filing
  • 835 remittance files and payment posting history
  • Patient balances, payment plans, and credit balances
  • Fee schedules, payer correspondence, and credentialing records

Treat this as a medical billing data migration. Check record counts and dollar totals against the old system before you accept the files, and keep PHI out of unencrypted email.

Deadlines That Keep Running During the Switch

Payer clocks keep running while you switch medical billing companies. Load these deadlines into your ledger on the first day:

Open workDeadlineSource
Original Medicare claim not yet billed12 months (one calendar year) from the date of service; a late claim gets an untimely denial that can’t be appealedCMS Transmittal 2140
Original Medicare denialRedetermination request within 120 days of receiving the ERA or paper remittance; receipt presumed 5 days after the notice dateCMS MLN006562
Medicare redetermination decisionReconsideration request within 180 days of receiving the decisionCMS MLN006562
MedicaidSet by each state, within the federal ceilingYour state Medicaid manual
Medicare Advantage and commercial plansSet by each contract and provider manualYour payer contracts

The CMS timely filing transmittal covers the one calendar year limit and its narrow exceptions. For each appeal level, see the CMS Medicare appeals guide, and remember that the appeal clock starts when you receive the remittance. Our guide to Medicaid timely filing limits covers state rules.

Work Old Claims in This Order

Give your legacy AR a working order that starts with the claims closest to losing all value:

  1. Clearinghouse rejections: These never reached the payer, so the filing clock is still running.
  2. Denials inside an appeal window: Rank them by days left and route them to denial and appeal follow-up.
  3. Claims with no payer response: Run an electronic claim status check (X12 276/277) before anyone picks up the phone.
  4. Large legacy AR balances over 90 days: Work the claims a payer can still pay.
  5. Small balances past every deadline: Write them off with a recorded reason, so the ledger closes.

Step 5: Test Claims and Run a Parallel Period Without Double Billing

Send a small batch of real claims for your top payers first. Confirm the clearinghouse and payer acknowledgments, the ERA, and the payment posting, then start a parallel period. During that period, both companies compare results, and a single company sends each claim.

Pick test claims that look like a normal week: your top payers, your common CPT codes, and at least one secondary claim. Ask your new medical billing company for the acknowledgment reports, then check that each ERA arrives and posts to the right account.

A parallel period means comparison. Both teams review the same charges and results, and one company transmits each claim. Duplicate claims come back rejected or denied, and the cleanup costs more time than the overlap saves. Practices that switch medical billing companies get burned when someone reads “parallel” as “send everything twice.”

Run the overlap until you’ve seen at least one full payment cycle from each major payer, with payments posted as well as claims accepted. The medical billing transition can stand on its own once the clean claim rate on new submissions matches or beats your baseline.

The Rejections That Show Up Most in the First Week

In the first week after a switch, rejections usually come from data errors that the clearinghouse catches before the payer reviews the claim. Expect these:

  • Subscriber ID mismatches between your system and the payer’s file
  • Payer IDs mapped to the wrong plan
  • Missing or invalid provider NPI or taxonomy codes
  • A submitter ID the payer hasn’t authorized yet

A rejected claim never reached adjudication, so you correct it and resubmit it. Denied claims went through processing and usually need an appeal. Our guide to common clearinghouse rejection codes lists the codes you’ll see and the fix for each one.

Step 6: The Medical Billing KPIs to Track Weekly for 90 Days

Compare seven numbers every week against the baseline you pulled before the switch: charge lag, claims accepted against claims sent, clean claim rate, denial rate and reasons, deposits against posted payments, unposted ERAs, and AR over 90 days. Act when a number moves the wrong way two weeks in a row.

Agree on these definitions with the new company before you switch medical billing companies, so both sides read the same report the same way.

KPIHow to measure itAct now if
Charge lagDays from date of service to claim submissionIt rises above baseline two weeks in a row
Claims accepted vs. sentClearinghouse and payer acknowledgments against claims sentAny batch has no acknowledgment
Clean claim rateClaims accepted on first submission divided by claims sentIt drops below baseline
Denial rate and top reasonsDenied claims divided by claims processed, grouped by reasonA new reason enters your top five
Deposits vs. posted paymentsBank deposits matched to posted paymentsAny deposit stays unmatched after one week
Unposted ERAsERA files received but not postedAny appear at all
AR over 90 daysShare of open AR older than 90 days, compared with the cutover snapshotIt grows two weeks in a row

Calculate days in AR once a month instead of every week: total AR divided by average daily charges. Read it by payer and by month of service, since the first weeks mix old work with new claims.

No single denial rate counts as normal for every practice. Specialty, payer mix, and each company’s definition of a denial all move the number. Write the definition into the contract, and judge the new company against your own baseline instead of a figure from someone else’s practice.

Give the new company the full 90 days before you judge it. The first two weeks carry the old company’s leftovers, and those leftovers can make a sound new team look slow.

What to Do If Collections Dip After the Switch

A dip between weeks two and six often comes from the payer payment cycle, so check timing before you blame either company. Work through six causes one payer at a time, and ask your billing company for a root cause on each payer instead of a general explanation.

Days in AR can rise for a month after you switch medical billing companies, even when the switch goes to plan. Check these causes in order:

  1. Cutover gap: Find any claims with no assigned sender.
  2. Payer mapping: Confirm claims go to the right payer ID.
  3. Unposted payments: Match every ERA to a posted payment.
  4. Recoupments and offsets: Check for payers reducing new payments to recover old overpayments. Your ERA payment posting team has to apply those 835 adjustments to the right old claims, or new payments look short.
  5. Enrollment or eligibility rejections: Confirm the new vendor got linked everywhere it needs to be.
  6. Charge lag: Check whether visits are getting billed late.

A dip that keeps growing past month three points to a process problem. At that stage, your medical practice cash flow needs a written fix list for each affected payer.

Collections Still Down Six Weeks After a Switch?Our posting team can reconcile your ERAs to bank deposits one payer at a time and show you where the money stopped, whether the gap sits in payer mapping, recoupments, or remits nobody posted.Request a Free RCM Audit →

How to Handle Patient Balances, Statements, and Collection Accounts

Pick one date after which only one company sends patient statements. Move payment plans and credit balances with the accounts, and settle balances already placed with a collection agency before the new company places anything. Patients should get one bill, with one phone number, from one company.

Switching medical billing companies confuses patients faster than it confuses payers. A patient who gets two statements with two phone numbers often pays neither until someone on your staff explains the change.

  • Set one statement switch date so no patient gets two bills.
  • Update the phone number and payment link printed on statements.
  • Move active payment plans with each patient’s remaining balance and schedule.
  • Move credit balances so refunds come from one place.
  • Confirm how card-on-file and patient portal payment details transfer.
  • Get the collection agency placement list and route agency payments to the right posting team.

Post first, then bill. The AMA revenue cycle guidance tells practices to verify insurance payments and adjustments before statements go out. During a switch, that check keeps patients from getting bills for balances their insurance already paid.

Changing Your EHR or PM System at the Same Time?

Change one system at a time if you can. If your software works, switch medical billing companies first and change the software later. Software that causes part of the problem needs its own conversion project, with its own testing and its own cutover date.

Doubling up slows troubleshooting. A denial spike in week three could come from the new team, the new system, or the data conversion, and you can’t tell which one without weeks of digging.

Changing medical billing companies and software together still works with a tighter plan:

  • Keep view access to the old system through the run-out.
  • Move open balances and claim history before go-live.
  • Test claims through the new practice management system before full volume.
  • Give the practice management system migration its own cutover date.

If your EHR works, you may not need to touch it. Our team can work inside your current EHR, so the billing change stays a billing change.

How Long Does It Take to Switch Medical Billing Companies?

No official standard sets the length of a switch. Four dates set yours: the contract’s notice period, the advance written notice your MAC needs, each payer’s enrollment turnaround, and the soonest filing deadline among unbilled charges. A planned medical billing transition often runs about 60 to 90 days from decision to stable reporting.

Work backward from the earliest of those dates when switching medical billing companies. At ClaimMax, the first claim we submit typically goes out within 30 days of signing, and the old claims keep getting worked after that through our billing onboarding process.

A Medical Billing Transition Checklist for the First 90 Days

Use this table as an illustrative medical billing transition plan. Adjust each window to your notice period and payer mix.

WindowPractice tasksNew billing company tasks
Days 1 to 10Pull the baseline, review the contract, and sign the new BAASet up system access and send the data request list
Days 11 to 30Give written notice and approve MAC and payer changesUpdate EDI, ERA, and HETS links, send test claims, and write the cutover memo
Days 31 to 60Review the weekly reconciliationRun the parallel period and work older claims by deadline
Days 61 to 90Hold the day 90 review against your baselineClose the ledger snapshot and confirm data return before the old company’s access ends

How to Choose a Billing Company That Transitions Well

The best medical billing company for your practice can show you a written transition plan, work in your current EHR, keep every login and deposit in your name, and report numbers you can match to your bank. Use those four tests as the core of how to choose a medical billing company when you’re switching.

Price and specialty experience matter too, and our guide to the benefits of outsourcing RCM covers them. Transition skill is harder to judge from a sales call, so ask for proof.

Questions to Ask a Medical Billing Company Before You Sign

  1. Who works our legacy claims, and at what rate?
  2. Will you give us a written transition plan with dates and named owners?
  3. Which payer and clearinghouse connections are already approved, and which are pending?
  4. Will every portal and clearinghouse login be in our practice’s name?
  5. How will you reconcile deposits to posted payments each week?
  6. Which reports will we get, and how do you define denial rate and clean claims?
  7. What happens to our data if we leave?

Ask for a medical billing audit of your own data before you sign, too. A company that won’t look at your aging report first is guessing at its plan.

Red Flags During Sales and Onboarding

Slow down if a medical billing company does any of these:

  • It guarantees more revenue or promises “no gap.”
  • It asks for deposits to go into an account you don’t control.
  • It sets up portal logins in its own name.
  • It wants patient data before it signs a BAA.
  • It can’t show you a sample report.
  • It gives a vague answer about old claims.

Compare Pricing by Effective Rate

Billing companies price their work as a percentage of collections, a fee per claim, a flat monthly fee, or a mix. Headline rates can hide setup fees, monthly minimums, statement charges, clearinghouse fees, credentialing, and AR cleanup work.

Calculate the effective rate instead: total annual fees divided by total annual collections. If you outsource medical billing, ask whether the rate also applies to collections on older claims, and get every fee in writing before you switch medical billing companies.

Put ClaimMax Through the Same Seven QuestionsAsk us who works your old claims, which payer connections we update first, and how we reconcile deposits to posted payments. You’ll get answers on paper before you sign anything.See How Our Onboarding Works →

2026 and 2027 Changes to Plan Your Switch Around

A switch in late 2026 or 2027 should account for four federal changes: HETS enrollment for every NPI, prior authorization rules already in effect for certain payers, payer prior authorization APIs due January 1, 2027, and claims attachment standards with a compliance date of May 26, 2028. Ask any new vendor how it handles all four.

If you plan to switch medical billing companies in 2027, put these items in your vendor questions now:

ChangeStatusKey dateWhat to ask your new company
HETS enrollment for each NPIIn effectMay 11, 2026How will you link your HETS ID to our NPIs?
Prior authorization decision times and denial reasons (CMS-0057-F)In effect for impacted payers2026How will authorization status and denial reasons carry through the switch?
Prior Authorization, Provider Access, and Payer-to-Payer APIs (CMS-0057-F)Final ruleGenerally January 1, 2027Is your workflow ready to use payer APIs with our EHR?
Claims attachments (X12N 275 and 277, version 6020)Final ruleCompliance by May 26, 2028What is your plan, and which clearinghouse steps does it depend on?
Drug prior authorization (CMS-0062-P)Proposed onlyComment period closed June 15, 2026Treat it as a proposal until CMS finalizes it

Under the rule summarized in the CMS-0057-F fact sheet, impacted payers other than qualified health plan (QHP) issuers on the federally facilitated exchanges must decide expedited requests within 72 hours and standard requests within seven calendar days. Impacted payers must also give a specific reason for each denied prior authorization.

The impacted payers are Medicare Advantage organizations, state Medicaid and CHIP fee-for-service programs, Medicaid managed care plans, CHIP managed care entities, and QHP issuers on the federally facilitated exchanges. Commercial plans outside that list don’t fall under these timeframes, so check each contract.

HHS adopted the claims attachment standards in a claims attachments final rule that took effect May 26, 2026, and it declined to adopt an attachment standard for prior authorization. CMS still lists the drug rule as proposed on its CMS interoperability rule status page.

Authorizations need extra care in any handoff this year. In a September 2026 MGMA Stat poll, 44% of medical group leaders said payer prior authorization turnaround got slower in 2026 than in 2025. Carry every authorization number and expiration date into the new company’s system before cutover.

How ClaimMax RCM Runs a Billing Transition

ClaimMax RCM runs each switch on the 4-Lane Handoff, with a parallel transition so practices keep their claim cycle moving while access gets set up. The same team handles medical billing outsourcing for more than 50 specialties in all 50 states, and a free analysis of your aging report comes before any contract.

Any medical billing company can call onboarding easy, so ask to see the plan on paper before you switch medical billing companies. Our outsourced medical billing page shows what changes on day one and what stays the same for your staff.

Ready to Switch Medical Billing Companies Without a Cash Flow Gap?Send us your aging report and current contract terms. We’ll map your cutover date, your old claims plan, and all four lanes for your payers before you give notice.Review Your Transition Plan →

Frequently Asked Questions

Will switching medical billing companies interrupt my cash flow?

It can for a few weeks. You can switch medical billing companies without a lasting gap if every open claim has an owner, every payer connection gets updated before cutover, and one company sends each claim. Most losses come from claims nobody works and payments routed to the old setup, and you can fix both before go-live.

Can I switch medical billing companies in the middle of the year?

Yes. The effective date matters more than the calendar month. Start on the first day of a month to keep reporting simple, and check two things first: your contract’s notice terms and the soonest filing deadline among your unbilled charges. Waiting for January can cost more than switching in July.

Do providers need to be recredentialed when changing medical billing companies?

No. Credentialing sits between your providers and the payers, so it stays in place unless your TIN, group, or practice location changes. You still need to update the billing agency on your Medicare enrollment, reroute ERA delivery, and keep your CAQH profile and payer portal admin rights under practice control.

What if my current medical billing company won’t release my data?

Put every request in writing and cite your contract and BAA. HHS guidance says a business associate generally can’t block your access to PHI to settle a payment dispute. If the company keeps stalling, bring in counsel, and rebuild claim history from clearinghouse reports and payer portals while you wait.

Can the old and new billing companies both submit claims during the overlap?

Both companies can work the account, but one company should send each claim. Duplicate claims get rejected or denied and delay payment. Ask your MAC in writing whether it can keep two billing agents on file, and split claims by date of service if it can.

Who gets paid for old claims collected after I leave?

Whoever your contracts name. Some agreements let the old company keep a fee on collections it worked after termination, and the new company may charge for older claims too. Assign each claim’s fee to one company in writing, or a single payment can show up on two invoices.

Should I tell patients that my practice changed billing companies?

Yes, through the statement itself. Update the phone number, payment link, and return address before the first new statement goes out. Give your front desk staff the switch date, so they can answer balance questions and send older account questions to the right company during the run-out.

What should a medical billing transition checklist include?

A complete checklist covers a baseline from the past 12 months, a contract and BAA review, a written data request, a cutover memo, updates to all four lanes of the ClaimMax 4-Lane Handoff, test claims, a parallel period, weekly KPI checks, and a review at day 90.

This guide is general information, not legal advice. Have counsel review contracts and BAAs before you act on them.

Sources

  1. MGMA Stat, “Days in A/R holds steady for most practices,” July 28, 2026
  2. CGS Medicare, Checking Claim Status (payment floor)
  3. MGMA Stat, “Detecting and fixing leaks across the revenue cycle,” January 6, 2026
  4. HHS, FAQ 2074: business associate access to PHI
  5. HHS, Sample Business Associate Agreement Provisions
  6. CMS, Transmittal 3346 (EDI and ERA enrollment, billing agents)
  7. CMS, CMS-588 Electronic Funds Transfer Authorization Agreement
  8. CMS, HETS EDI: How to Enroll
  9. CMS, CMS-855B Medicare Enrollment Application
  10. Cornell Legal Information Institute, 42 CFR 424.516
  11. CMS, Transmittal 2140 (timely filing)
  12. CMS, MLN006562 Medicare Parts A and B Appeals Process
  13. AMA, 8 keys to improve revenue cycle management in your practice
  14. CMS, Interoperability and Prior Authorization Final Rule (CMS-0057-F) fact sheet
  15. Federal Register, Claims Attachments Transactions final rule, March 24, 2026
  16. CMS, Interoperability Policies and Regulations
  17. MGMA Stat, prior authorization turnaround poll, September 1, 2026

About the Author

Justin Johnson

Justin Johnson editorial standards at ClaimMax RCM and has spent 14 years inside medical billing operations across cardiology, surgical specialties, behavioral health, and physician group practices. He writes about provider credentialing, payer enrollment, specialty coding, modifier discipline, payer-rule shifts, denial root-causes, and the operational side of revenue cycle management. AAPC-certified. HIPAA-trained. Editorially accountable.

Email: justin@claimmaxrcm.com

Phone: +1 (916) 299-5335